TIMKEN LSE408BRHFATL Flange Block Bearings

L1:104 mm; H:219 mm; A1:20 mm; s1:36.95 mm; N:16mm; A2:61.4 mm; J1:86 mm; S:12 mm; B:32.5 mm; J:184 mm;

Shaft:Provided; Roller Lining:None; Shaft:Provided; Thread Size on Cam Follower (M)(mm):M6; h(mm):12 ～ 25; Material:[Carbon Steel] 1045; RoHS:6; Surface Treatment:Electroless Nickel P; Category:Cam Followers; Roller Type:[Spherical Outer Rin;

Bearing I.D. d(mm):10; Width T(mm):30; Number of Bearings:Double; Flange Shape:Square Type; Type:Bearings with Housin; Number of Bearings:Double; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Shape:Flange Type;

Basic Dynamic Load Rating(N):82000; Number of Raceway Ring Rows:Single Row; B:31; Load Direction:Radial; Size Standards:Metric System; Size Standards:Metric System; Type:Ball; Precision:Grade 0; Max. Allowed rpm(rpm):6300; Outer Ring Shape:Flat;

Flange Shape:Round Type; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Volume Discount:Available; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):40; Bearing Retained:Yes (with retaining;

B1:50 mm; A2:28 mm; S:17.5 mm; Recommended tightening torque for set screw:8 Nm; N:28mm; L3:74 mm; L:137 mm; SW:3.97 mm; N1:18 mm; A:41 mm;

A5:17.4 mm; B1:44.3 mm; T max.:100 °C; T min.:-20 °C; Recommended tightening torque for set screw:5.5 Nm; SW:3 mm; s1:30.9 mm; B:34.8 mm; Designation of bearing:EX205G2L3; d1:37.4 mm;

H2:41 mm; S:12.7 mm; T max.:100 °C; G:R1/8"; C:12.8 kN; Designation of bearing:UC203G2L4; Recommended tightening torque for set screw:5.5 Nm; L1:225 mm; C0:6.65 kN; A:21 mm;

T min.:-20 °C; Designation of housing:F218-; T max.:100 °C; Recommended tightening torque for set screw:27.1 Nm; s1:51.5 mm; d:88.9 mm; S:24.5 mm; G:M10x1; Designation of bearing:EX218-56G2L3; N:23mm;

Flange Shape:Round Type; Housing Material:1045 Carbon Steel; Shape:Flange Type; Type:Bearings with Housin; Volume Discount:Available; Flange O.D. H(φ):45; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Shape:Flange Type; Bearing Retained:No;

Da max:111 mm; Characteristic rolling element frequency, BSF:6.18 Hz; Characteristic inner ring frequency, BPFI:9.83 Hz; Fatigue limit load, Cu:24.5 kN; Y0:2.73; ra max:1.5 mm; D1:107 mm; Mass:1.59 kg; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:200 °C;

D1:269.8 mm; rs min:4 mm; Radial clearance class:C3; d:150 mm; Nlim:3,300 rpm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:88.8 kN; da max:190 mm; D:320 mm; F:193 mm;

Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Width T(mm):45 ～ 55; Bearing I.D. d(mm):17; Shape:Flanged Pilot Type; Number of Bearings:Double; Seals:DD (Contact Rubber S; Number of Bearings:Double;

Design Units:Imperial; Cg - Geometry Factor:0.153; D:6.7500 in; Series:L725300; r - Cup Backface To Clear Radius1:0.130 in; C - Cup Width:0.7200 in; Db - Cup Backface Backing Diameter:6.3 in; Da - Cup Frontface Backing Diameter:6.61 in; e - ISO Factor2:0.48; Y - ISO Factor3:1.26;

Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:EX206G2L3; Z:71 mm; T max.:100 °C; H2:130 mm; S:18.2 mm; G:M6x1; Designation of open end cover:SCOE206-30; Dz:70 mm; C:19.5 kN;